Maintenance and Scheduled Service Checklist
Coolant Service and Bleeding Checklist
A cooling service sheet for coolant type, hose condition, thermostat behavior and air bleeding.
Log in to download freeFree PDF locked until login / registration
Checklist Preview
- Coolant: confirm coolant type and service interval
- Coolant: inspect hoses, clamps, radiator and cap
- Coolant: drain only when system is cool and depressurized
- Coolant: flush if contamination or wrong coolant is suspected
- Coolant: refill at correct bleed points
- Coolant: run fan cycle while monitoring temperature
- Coolant: top up overflow bottle after air purge
- Coolant: pressure test if unexplained loss remains
- Coolant: check for oil/coolant cross-contamination
- Coolant: record final temperature and level
How To Use It
Use this checklist before replacing parts. Work from the top down, record the result of each step, and only move to repair decisions when the failed test is clear.
The downloadable PDF includes checkboxes, notes space, final verification and technician sign-off fields for workshop records.
Download Access
The page preview is public for SEO and learning. The PDF download route is available only to logged-in registered users through the existing Tutor login system.
Tools To Prepare
- Torque wrench
- Service manual
- Drain pan
- Filter wrench
- Maintenance log
Evidence To Record
- Fluids used
- Torque marks
- Date/mileage
- Next due interval
SEO and Research Notes
This original Motomech worksheet is built from common workshop inspection logic: verify the complaint, inspect safety-critical systems first, measure before replacing parts, document the failed test, and finish with a repeatable road-test or service verification.
