m/yamaha-motorcycles u/Yamaha Yuri 1 year ago

Help thread: Yamaha R6 2008 check engine light on crank no start with no fuel pressure

I am opening this because the search results for Yamaha R6 2008 check engine light on crank no start with no fuel pressure are a mess: three short answers, two miracle products, and one guy saying 'just sell it'. I can inspect wiring and physical fitment, but I want to avoid missing the simple stuff: bad earths, melted connectors, loose clamps, leaks, or cheap accessories causing noise.

34 5 comments Reply

Join the discussion

Log in to reply

Discussion

5 replies
u/XMax Ben 1 year ago

For Yamaha R6 2008 check engine light on crank no start with no fuel pressure, I would do a visual inspection first. Heat marks, loose grounds, cheap adapters, bad crimps and tired clamps explain a shocking number of problems.

1 Share
u/Garage Sara 1 year ago

Do not underestimate old fuel, low battery voltage, or a loose ground. They love pretending to be expensive components. That is how I would approach Yamaha R6 2008 check engine light on crank no start with no fuel pressure before spending money.

1 Share
u/Thomas Spagnoli 1 year ago

Thomas Spagnoli: workshop approach for Yamaha R6 2008 check engine light on crank no start with no fuel pressure

My workshop rule for Yamaha R6 2008 check engine light on crank no start with no fuel pressure is simple: prove the basic condition first, then decide whether the clever part is actually needed.

  1. Inspect the physical installation first: clamps, brackets, heat shields, routing, grounds, fuses, and connector strain.
  2. Measure voltage drop under load on electrical faults; for exhaust faults, listen for leaks at the head and joints.
  3. Do not ignore heat. Melted plastic, brown terminals, blue pipe sections, and cooked insulation are evidence.
  4. After any repair, test hot and cold. Many electrical/exhaust issues behave differently once everything expands.

If the result changes hot versus cold, or under load versus idle, write that down. Those conditions are not noise; they are clues.

The free Motorcycle Mechanics Course on this site goes through this exact thinking: electrical checks, fuel checks, mechanical baseline, diagnostic flow and safe habits. It will help you approach Yamaha R6 2008 check engine light on crank no start with no fuel pressure with less guessing.

Post the machine model, year, mileage and one clear symptom, and I would choose the next test from there.

1 Share
u/MT Nina 1 year ago

What would be the one tool you would want on the bench before touching Yamaha R6 2008 check engine light on crank no start with no fuel pressure?

1 Share
u/Yamaha Yuri OP 1 year ago

I am going to do the boring checks first. Annoyingly, the boring checks are starting to sound like the correct checks. At least now I know what I am trying to prove before spending money.

1 Share
Forum avatars are served locally by Motomech Academy.