Help thread: Yamaha R1 starts for two seconds then dies when throttle opens

For Yamaha R1 starts for two seconds then dies when throttle opens, I would write down the current condition first. Model, year, mileage, recent work, and exact symptom will save ten posts of guessing.

Do not underestimate old fuel, low battery voltage, or a loose ground. They love pretending to be expensive components. That is how I would approach Yamaha R1 starts for two seconds then dies when throttle opens before spending money.

What would be the one tool you would want on the bench before touching Yamaha R1 starts for two seconds then dies when throttle opens?

Thomas Spagnoli: workshop approach for Yamaha R1 starts for two seconds then dies when throttle opens

My workshop rule for Yamaha R1 starts for two seconds then dies when throttle opens is simple: prove the basic condition first, then decide whether the clever part is actually needed.

1. Start with model, year, mileage, engine type, recent work and the exact symptom.
2. Separate opinion from measurement: voltage, pressure, compression, plug condition, code history and visual evidence.
3. Make a small checklist and tick it off in order. It is slower for five minutes and faster for the whole repair.
4. When in doubt, return the machine to a known baseline before tuning or modifying.

If the result changes hot versus cold, or under load versus idle, write that down. Those conditions are not noise; they are clues.

If you are new to this, join the free Motorcycle Mechanics Course on the platform. I made it to explain the workshop logic behind cases like Yamaha R1 starts for two seconds then dies when throttle opens, not just to list random parts.

Bring one result at a time and the forum can narrow it down properly. That is how a thread becomes a real workshop note.

Update: I am going to start with the measurements instead of ordering parts tonight. My wallet already looks relieved. I will post the exact result, even if the answer ends up being embarrassingly simple.