Help thread: Yamaha Fazer 1000 neutral light on but ECU does not see neutral

For Yamaha Fazer 1000 neutral light on but ECU does not see neutral, I would do a visual inspection first. Heat marks, loose grounds, cheap adapters, bad crimps and tired clamps explain a shocking number of problems.

I learned this the boring way: do one test, write the result down, then move on. Five changes at once only tells you that one of five things mattered. That is how I would approach Yamaha Fazer 1000 neutral light on but ECU does not see neutral before spending money.

If the bike runs fine most of the time, would you still replace parts, or keep riding with a notebook and test plan?

Thomas Spagnoli: workshop approach for Yamaha Fazer 1000 neutral light on but ECU does not see neutral

I would treat Yamaha Fazer 1000 neutral light on but ECU does not see neutral as a diagnosis, not as a shopping list. The first job is to turn a vague complaint into a repeatable test.

1. Inspect the physical installation first: clamps, brackets, heat shields, routing, grounds, fuses, and connector strain.
2. Measure voltage drop under load on electrical faults; for exhaust faults, listen for leaks at the head and joints.
3. Do not ignore heat. Melted plastic, brown terminals, blue pipe sections, and cooked insulation are evidence.
4. After any repair, test hot and cold. Many electrical/exhaust issues behave differently once everything expands.

Do not let forum confidence replace measurement. If two possible causes fit Yamaha Fazer 1000 neutral light on but ECU does not see neutral, choose the one you can test cleanly first.

If you are new to this, join the free Motorcycle Mechanics Course on the platform. I made it to explain the workshop logic behind cases like Yamaha Fazer 1000 neutral light on but ECU does not see neutral, not just to list random parts.

Bring one result at a time and the forum can narrow it down properly. That is how a thread becomes a real workshop note.

Update: I am going to start with the measurements instead of ordering parts tonight. My wallet already looks relieved. I will post the exact result, even if the answer ends up being embarrassingly simple.