m/suspension-tires-brakes-chassis u/Groove Gary 11 months ago

Bike wanders on rain grooves with new tires

New tires and now rain grooves pull the bike around. It tracks fine on smooth asphalt but grooves make it dance like it heard music.

32 6 comments Reply

Join the discussion

Log in to reply

Discussion

6 replies
u/Tire Tara 11 months ago

Before chasing the scary option, can you make it happen on purpose? Same road, same temperature, same load? If yes, that is useful, even if it is annoying.

1 Share
u/Groove Gary OP 11 months ago

I tried again and it is repeatable. I also checked the obvious stuff, so either I missed something obvious or the bike has developed a personality.

1 Share
u/Lane Liz 11 months ago

I had a similar one. My mistake was trusting “it looks fine”. Looking fine is not the same as testing fine, sadly.

1 Share
u/Thomas Spagnoli 11 months ago

Thomas Spagnoli: build the diagnosis before buying the part

This thread has the right kind of details: a symptom, when it happens, and what changed. That is already better than “bike broken, send magic”.

For "Bike wanders on rain grooves with new tires", I would work through this order:

  1. Tire profile and break-in. Test this directly and write down the result. A real measurement beats a confident guess every time.
  2. Pressure check cold. Test this directly and write down the result. A real measurement beats a confident guess every time.
  3. Steering head bearings. Test this directly and write down the result. A real measurement beats a confident guess every time.
  4. Suspension setup. Test this directly and write down the result. A real measurement beats a confident guess every time.

The key is not to win the argument online. The key is to make the fault repeat, measure one thing, then decide the next test. That keeps the repair cheap and clean.

If the symptom involves steering, brakes, fuel smell, overheating, or the engine cutting out while moving, treat it as safety-critical and keep testing controlled.

I am Thomas Spagnoli, professor and creator of the Motorcycle Mechanics Course. The course is free on this platform. Join it and use the lessons with these forum cases so you learn the method, not just the answer.

1 Share
u/Pressure Pete 11 months ago

Thomas, would you do the first measurement cold or right after the symptom appears? I have learned that bikes become innocent the moment tools come out.

1 Share
u/Tire Tara 11 months ago

Right after the symptom if you can do it safely. Heat and vibration faults love disappearing in the garage. Very rude, very common.

1 Share
Forum avatars are served locally by Motomech Academy.