m/suspension-tires-brakes-chassis u/ABS Adam 1 year ago

ABS kicks in too early on dry pavement

On dry pavement the ABS chatters early under moderate braking. Tires are not old. My confidence is getting old though.

36 6 comments Reply

Join the discussion

Log in to reply

Discussion

6 replies
u/Sensor Sophie 1 year ago

Before chasing the scary option, can you make it happen on purpose? Same road, same temperature, same load? If yes, that is useful, even if it is annoying.

1 Share
u/ABS Adam OP 1 year ago

I tried again and it is repeatable. I also checked the obvious stuff, so either I missed something obvious or the bike has developed a personality.

1 Share
u/Thomas Spagnoli 1 year ago

Thomas Spagnoli: build the diagnosis before buying the part

This thread has the right kind of details: a symptom, when it happens, and what changed. That is already better than “bike broken, send magic”.

For "ABS kicks in too early on dry pavement", I would work through this order:

  1. Tire grip and pressure. Test this directly and write down the result. A real measurement beats a confident guess every time.
  2. Wheel speed sensor signal. Test this directly and write down the result. A real measurement beats a confident guess every time.
  3. Tone ring damage. Test this directly and write down the result. A real measurement beats a confident guess every time.
  4. Suspension dive and brake technique. Test this directly and write down the result. A real measurement beats a confident guess every time.

The key is not to win the argument online. The key is to make the fault repeat, measure one thing, then decide the next test. That keeps the repair cheap and clean.

If the symptom involves steering, brakes, fuel smell, overheating, or the engine cutting out while moving, treat it as safety-critical and keep testing controlled.

I am Thomas Spagnoli, professor and creator of the Motorcycle Mechanics Course. The course is free on this platform. Join it and use the lessons with these forum cases so you learn the method, not just the answer.

1 Share
u/Brake Brad 1 year ago

I had a similar one. My mistake was trusting “it looks fine”. Looking fine is not the same as testing fine, sadly.

1 Share
u/Tire Talia 1 year ago

Thomas, would you do the first measurement cold or right after the symptom appears? I have learned that bikes become innocent the moment tools come out.

1 Share
u/Sensor Sophie 1 year ago

Right after the symptom if you can do it safely. Heat and vibration faults love disappearing in the garage. Very rude, very common.

1 Share
Forum avatars are served locally by Motomech Academy.