Help thread: Tenere 700 OBD2 scanner shows no communication

For Tenere 700 OBD2 scanner shows no communication, I would not start by clearing codes. Photograph the code, check battery voltage at rest and while cranking, then inspect the connector related to the system. A weak supply can make a scanner sound more dramatic than the bike really is.

I learned this the boring way: do one test, write the result down, then move on. Five changes at once only tells you that one of five things mattered. That is how I would approach Tenere 700 OBD2 scanner shows no communication before spending money.

If the bike runs fine most of the time, would you still replace parts, or keep riding with a notebook and test plan?

Thomas Spagnoli: workshop approach for Tenere 700 OBD2 scanner shows no communication

I would treat Tenere 700 OBD2 scanner shows no communication as a diagnosis, not as a shopping list. The first job is to turn a vague complaint into a repeatable test.

1. Record the exact code, freeze-frame data if available, and whether Tenere 700 OBD2 scanner shows no communication returns immediately or only after riding.
2. Check battery voltage, charging voltage, main grounds, and scanner connection quality before trusting the code as a failed component.
3. Inspect the relevant connector for spread pins, moisture, corrosion, and loom tension near steering head or engine heat.
4. Clear the code only after writing it down, then reproduce the condition and see what comes back first.

Do not let forum confidence replace measurement. If two possible causes fit Tenere 700 OBD2 scanner shows no communication, choose the one you can test cleanly first.

This is also the kind of method I teach in the free Motorcycle Mechanics Course here on the platform: observe, measure, confirm, repair, then test again. It is much easier to solve Tenere 700 OBD2 scanner shows no communication when the process is clear.

If you report back, include the measured values, not only whether it felt better. Numbers make the thread useful for the next rider too.

Good point about documenting the baseline. I took photos before touching anything, which may be my most professional move this week. I like that this turned into a checklist instead of a guessing contest.