Help thread: Honda VTR1000 neutral light on but ECU does not see neutral
I have been reading about Honda VTR1000 neutral light on but ECU does not see neutral and I am not sure which step should come first in a real workshop diagnosis. I can inspect wiring and physical fitment, but I want to avoid missing the simple stuff: bad earths, melted connectors, loose clamps, leaks, or cheap accessories causing noise.

Discussion
5 repliesFor Honda VTR1000 neutral light on but ECU does not see neutral, I would do a visual inspection first. Heat marks, loose grounds, cheap adapters, bad crimps and tired clamps explain a shocking number of problems.
If this involves road testing, keep it legal and safe. A quiet car park teaches more than a panic run down a public road. That is how I would approach Honda VTR1000 neutral light on but ECU does not see neutral before spending money.
Would you test Honda VTR1000 neutral light on but ECU does not see neutral cold first, or wait until the symptom appears hot? Mine changes after about twenty minutes.
Thomas Spagnoli: workshop approach for Honda VTR1000 neutral light on but ECU does not see neutral
Before buying anything for Honda VTR1000 neutral light on but ECU does not see neutral, I would build a small test path. The cheapest repair is often the one where you do not replace a good part.
The best next step is the one that can prove something. A test that only creates another guess is just a more expensive guess.
If you are new to this, join the free Motorcycle Mechanics Course on the platform. I made it to explain the workshop logic behind cases like Honda VTR1000 neutral light on but ECU does not see neutral, not just to list random parts.
Bring one result at a time and the forum can narrow it down properly. That is how a thread becomes a real workshop note.
Small update from my side: I found one suspect connector and I am cleaning it before touching anything more expensive. I will post the exact result, even if the answer ends up being embarrassingly simple.