m/bmw-motorcycles u/BMW Bruno 8 months ago

Help thread: BMW R1200GS check engine light on crank no start with no fuel pressure

I am opening this because the search results for BMW R1200GS check engine light on crank no start with no fuel pressure are a mess: three short answers, two miracle products, and one guy saying 'just sell it'. I can inspect wiring and physical fitment, but I want to avoid missing the simple stuff: bad earths, melted connectors, loose clamps, leaks, or cheap accessories causing noise.

32 5 comments Reply

Join the discussion

Log in to reply

Discussion

5 replies
u/Bimmer Mia 8 months ago

For BMW R1200GS check engine light on crank no start with no fuel pressure, I would do a visual inspection first. Heat marks, loose grounds, cheap adapters, bad crimps and tired clamps explain a shocking number of problems.

1 Share
u/Chain Ben 8 months ago

I learned this the boring way: do one test, write the result down, then move on. Five changes at once only tells you that one of five things mattered. That is how I would approach BMW R1200GS check engine light on crank no start with no fuel pressure before spending money.

1 Share
u/Thomas Spagnoli 8 months ago

Thomas Spagnoli: workshop approach for BMW R1200GS check engine light on crank no start with no fuel pressure

I would treat BMW R1200GS check engine light on crank no start with no fuel pressure as a diagnosis, not as a shopping list. The first job is to turn a vague complaint into a repeatable test.

  1. Inspect the physical installation first: clamps, brackets, heat shields, routing, grounds, fuses, and connector strain.
  2. Measure voltage drop under load on electrical faults; for exhaust faults, listen for leaks at the head and joints.
  3. Do not ignore heat. Melted plastic, brown terminals, blue pipe sections, and cooked insulation are evidence.
  4. After any repair, test hot and cold. Many electrical/exhaust issues behave differently once everything expands.

Do not let forum confidence replace measurement. If two possible causes fit BMW R1200GS check engine light on crank no start with no fuel pressure, choose the one you can test cleanly first.

The free Motorcycle Mechanics Course on this site goes through this exact thinking: electrical checks, fuel checks, mechanical baseline, diagnostic flow and safe habits. It will help you approach BMW R1200GS check engine light on crank no start with no fuel pressure with less guessing.

Post the machine model, year, mileage and one clear symptom, and I would choose the next test from there.

1 Share
u/Garage Sara 8 months ago

If the bike runs fine most of the time, would you still replace parts, or keep riding with a notebook and test plan?

1 Share
u/BMW Bruno OP 8 months ago

I am going to do the boring checks first. Annoyingly, the boring checks are starting to sound like the correct checks. At least now I know what I am trying to prove before spending money.

1 Share
Forum avatars are served locally by Motomech Academy.