m/benelli-motorcycles u/Benelli Bruno 3 months ago

Help thread: Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel

This thread is for Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel. I want to understand the logic, not just throw a shiny part at the bike and hope it feels appreciated. I am collecting practical advice from people who actually test things, not just repeat what they saw in a two-minute video.

21 5 comments Reply

Join the discussion

Log in to reply

Discussion

5 replies
u/TRK Mia 3 months ago

For Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel, I would write down the current condition first. Model, year, mileage, recent work, and exact symptom will save ten posts of guessing.

1 Share
u/125 Ben 3 months ago

Also check whether anything was changed recently. The last hands near the bike are often the first suspect, even when those hands are our own. That is how I would approach Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel before spending money.

1 Share
u/Garage Sara 3 months ago

For Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel, is there a measurement that proves the part is bad, or is it mostly elimination?

1 Share
u/Thomas Spagnoli 3 months ago

Thomas Spagnoli: workshop approach for Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel

With Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel, the useful question is not 'what part is famous for this?' but 'which system stopped doing its job, and under what condition?'

  1. Start with model, year, mileage, engine type, recent work and the exact symptom.
  2. Separate opinion from measurement: voltage, pressure, compression, plug condition, code history and visual evidence.
  3. Make a small checklist and tick it off in order. It is slower for five minutes and faster for the whole repair.
  4. When in doubt, return the machine to a known baseline before tuning or modifying.

The mistake I see most often with Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel is jumping to the part that sounds most famous. A good mechanic proves the system first: supply, command, output and mechanical condition.

This is also the kind of method I teach in the free Motorcycle Mechanics Course here on the platform: observe, measure, confirm, repair, then test again. It is much easier to solve Benelli TNT 1130 crankshaft position sensor suspected with no spark no fuel when the process is clear.

If you report back, include the measured values, not only whether it felt better. Numbers make the thread useful for the next rider too.

1 Share
u/Benelli Bruno OP 3 months ago

Good point about documenting the baseline. I took photos before touching anything, which may be my most professional move this week. I like that this turned into a checklist instead of a guessing contest.

1 Share
Forum avatars are served locally by Motomech Academy.