ADAS Calibration and Post-Repair Validation Master Course

01 AD01 - ADAS Professional Mindset and Post-Repair Responsibility

• AD01-L01 – What ADAS Calibration and Post-Repair Validation Actually Cover
• AD01-L02 – ADAS Risk, Legal Responsibility, Customer Disclosure, and Road Release
• AD01-L03 – Static Calibration, Dynamic Calibration, Initialization, Aiming, and Verification Differences

02 AD02 - ADAS Safety, Service Information, and Calibration Readiness

• AD02-L01 – OEM Service Information, Preconditions, TSBs, and Repair Order Control
• AD02-L02 – Battery Support, Tire Pressure, Alignment, Load, Fuel, and Ride Height Preconditions
• AD02-L03 – Workshop Space, Lighting, Floor Level, Targets, and Measurement Discipline

03 AD03 - Sensor Suite Architecture and System Roles

• AD03-L01 – Camera, Radar, Ultrasonic, LiDAR, Steering, Yaw, and Wheel Speed Sensor Roles
• AD03-L02 – Sensor Fusion, Object Detection, Lane Detection, and Driver Warning Logic
• AD03-L03 – Network Communication, DTCs, Freeze Frame, and Module Dependencies

04 AD04 - Forward Camera Calibration and Lane Systems

• AD04-L01 – Forward Camera Mounting, Windshield, Bracket, and Optical Axis Control
• AD04-L02 – Lane Departure, Lane Keep, Traffic Sign, and Camera Target Workflows
• AD04-L03 – Camera Calibration Failure Causes and Validation Road Test

05 AD05 - Front Radar Calibration and ACC/AEB Logic

• AD05-L01 – Front Radar Mounting, Brackets, Bumper Covers, and Radar Axis
• AD05-L02 – Adaptive Cruise, AEB, Distance Warning, and Radar Plausibility
• AD05-L03 – Radar Calibration Failure, Metal Objects, Reflections, and Road Validation

06 AD06 - Blind Spot, Rear Radar, Cross Traffic, and Side Sensors

• AD06-L01 – Blind Spot Monitor Radar Location, Bumper Influence, and Mounting Accuracy
• AD06-L02 – Rear Cross Traffic Alert, Parking Support, and Side Detection Logic
• AD06-L03 – Bumper Repair, Paint Thickness, Brackets, and Sensor Obstruction Cases

07 AD07 - Ultrasonic Parking Sensors and Low-Speed Assistance

• AD07-L01 – Ultrasonic Sensor Operation, Park Assist, and Short-Range Detection
• AD07-L02 – Sensor Ring, Paint, Angle, Harness, and Bumper Refit Problems
• AD07-L03 – Parking Aid Validation, False Beeps, No Detection, and Environmental Limits

08 AD08 - Surround View, Rear Camera, and Parking Camera Calibration

• AD08-L01 – Rear Camera, 360 Camera, Stitching, and Image Geometry
• AD08-L02 – Camera Replacement, Tailgate/Bumper Repair, and Calibration Mats
• AD08-L03 – Image Distortion, Guidelines, Camera Aim, and Final Parking Validation

09 AD09 - Steering Angle, Yaw, Acceleration, and Chassis Inputs

• AD09-L01 – Steering Angle Sensor Calibration and Centering Logic
• AD09-L02 – Yaw Rate, Lateral Acceleration, Wheel Speed, and Stability Inputs
• AD09-L03 – Alignment, Suspension, Ride Height, and Chassis Geometry Effects

10 AD10 - Wheel Alignment and ADAS Calibration Relationship

• AD10-L01 – Why Alignment Must Precede Many ADAS Calibrations
• AD10-L02 – Thrust Angle, Steering Center, Camber/Caster/Toe, and Sensor Aim
• AD10-L03 – Post-Alignment ADAS Validation and Customer Report

11 AD11 - Collision Repair, Body Panels, Glass, Bumpers, and Structural Influence

• AD11-L02 – Bumper Cover, Grille, Bracket, Radar Emblem, and Paint Material Influence
• AD11-L03 – Structural Pulls, Subframe Position, Panel Gaps, and Sensor Mounting Integrity
• AD11-L01 – Windshield Replacement and Camera Calibration Requirements

12 AD12 - Scan Tool Workflows, DTCs, Initialization, and Calibration Menus

• AD12-L01 – Pre-Scan, Post-Scan, Health Report, and ADAS Module Discovery
• AD12-L02 – Calibration Menu Logic, Initialization, Variant Coding, and Sensor Learning
• AD12-L03 – DTC Interpretation, Incomplete Calibrations, and Warning Lamp Strategy

13 AD13 - Static Calibration Setup and Target Placement Mastery

• AD13-L01 – Measuring Centerline, Wheel Axis, Target Distance, and Height
• AD13-L02 – Target Boards, Mats, Lasers, Plumb Bobs, and Measurement Error Control
• AD13-L03 – Common Static Calibration Mistakes and Quality Control

14 AD14 - Dynamic Calibration and Road-Test Validation

• AD14-L01 – Dynamic Calibration Preconditions, Road Type, Speed, Lane Markings, and Traffic
• AD14-L02 – Road-Test Data Capture, Event Logging, and Driver Assistance Verification
• AD14-L03 – Failed Dynamic Calibration, Environmental Limits, and Repeat Strategy

15 AD15 - Case Studies: Camera, Radar, Blind Spot, and Parking Faults

• AD15-L01 – Forward Camera Replaced After Windshield: Calibration Case Study
• AD15-L02 – Front Radar After Bumper Repair: AEB and ACC Warning Case Study
• AD15-L03 – Blind Spot Warning After Quarter Panel Repair: Rear Radar Case Study

16 AD16 - ADAS After Mechanical Repair, Tires, Suspension, and Steering Work

• AD16-L01 – ADAS Checks After Tires, Wheels, Ride Height, and Suspension Service
• AD16-L02 – ADAS Checks After Steering Rack, SAS, Alignment, and Subframe Work
• AD16-L03 – Routine Service vs Calibration Trigger: Decision Boundaries

17 AD17 - Documentation, Insurance, Liability, and Customer Communication

• AD17-L01 – Repair Order Notes, Evidence Photos, Measurements, and Calibration Certificates
• AD17-L02 – Insurance, Body Shop, Glass Shop, Dealer, and Sublet Communication
• AD17-L03 – Customer Handover, Limitations, Warnings, and Safe Use Disclaimer

18 AD18 - Quality Control, Audit Trail, and Post-Repair Release Standards

• AD18-L01 – Pre-Calibration QC, Calibration QC, and Post-Calibration QC Checklist
• AD18-L02 – Verification Drive, Warning Lamp Check, DTC Clear Rules, and Monitor Evidence
• AD18-L03 – Comeback Prevention, Audit Trail, and Final Release Decision

19 AD19 - Capstone ADAS Calibration Workflow and Professional Validation

• AD19-L01 – Building the Complete ADAS Calibration Decision Tree
• AD19-L02 – Timed Workshop Simulation: First 30 Minutes of an ADAS Calibration Job
• AD19-L03 – Final Capstone Case: Diagnose, Calibrate, Validate, Document, and Release

20 CAPSTONE - Integrated ADAS Calibration Diagnostic Cases and Professional Release

• Capstone Final Assessment and Professional Release Logic